Blue Etch Flow

Flowable dental etchant

BLUE ETCH FLOW product is used for etching dentine and enamel prior to composites, fissures and cavity seals. The product is also recommended for use before cementing glass fibre crown and root inlays. Thanks to its carefully formulated semi-solid consistence, BLUE ETCH FLOW reaches inaccessible dental grooves and fissures, ensuring their accurate etching.

Based on the properties of the best etchant BLUE ETCH we have developed super flowable BLUE ETCH FLOW recommended as an etching agent for fissures and cavity seals. Special super flowable consistency, developed under the authority of practitioners dentists, allows perfect etching of hard to reach arreas. Additionally is easy to rinse.

Composition:

  • o-phosphoric acid 36%, gel base, dyestuff
  • Colour – violet

Available packages:

  • 2 ml syringe + set of applicators
  • 10 ml syringe + dispenser + connector + set of applicators
  • 50 ml syringe + set of dispensers + connector + set of applicators
  • MONSTER PACK 10 x 2 ml syringes + set of applicators

Description

Properties of BLUE ETCH FLOW

  • Reaction between o-phosphoric acid and mineral components of the tooth causes matt enamel and increasing of adhesiveness
  • perfect gel consistency and thixotropic properties (gel becomes fluid during applying and coagulates just after application)
  • Does not flow from the surface and narrow edges of enamel
  • Very good adhesion to enamel
  • Easy to rinse
  • Violet colour enables precision apply and control during application and etching

Handling the product Blue Etch flow

PIC. 1.

PIC. 2.

PIC. 3.

1. Before the treatment immerse attached applicator into the spirit (ethyl alcohol) and then place it onto the syringe.
2. Prepare the cavity (picture 1)
3. Apply a thin layer of the etchant onto the dried surface. Etch no longer than 60 seconds (picture 2)
4. Rinse with strong air-flow and water (for about 15-20 seconds). Do not dry too much ( picture 3)
5. In case of enamel impurities repeat the process

CAUTION! Product intended for multiple use except the applicator which is for single use only. Multiple use of applicator may cause the risk of reinfection.

FOR PROFESSIONAL DENTAL USE ONLY

Comfort of use and application security

As one of the few world manufactures we use a system (adapter) for pumping the product from a big dosing syringe into the small one. It enables in 100% to use thixotropic advantages of etching gel. Implementation of the best quality three-element syringes of luer-lock type (with thread) guarantees safe pumping of preparation from one syringe into the other one. The connector located between syringes makes a tight connection during pumping of the preparation, making the work save and comfortable.

The high-quality, three-piece luer-lock threaded syringes in which our preparations are packaged ensure the full comfort and precision of the application. The luer lock thread allows easy and convenient connection of the syringe with the needle, by screwing it on the syringe. This is the best protection against unintentional spillage of the preparation during application. The rubber ring provides excellent control and smooth movement when applying the product.